|
The bottom seal for garage door is the appropriate garage door add-on to protect the garage from water and debris. Almost of American homes set their garage door sealed at the bottom. Through experience, many people choose the rubber seal over the vinyl type. The rubber seal usually lasts longer than the latter and can withstand extreme temperature from the -60 to 160 degrees. Over time, the bottom seal becomes dry and brittle because of prolonged exposure to high temperature and moisture. Damaged bottom seals do not harm the main door, but they cannot give 100% protection like what new ones can.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Ads
For this reason, they have to be replaced in the soonest possible time. This can be easily done with the garage door raised to the chest level. This allows easier access and manipulation of the garage door seal. Some facts about rubber seals and some installation guides will help in replacing bottom seals.
A complete rubber replacement kit includes the rubber seal, the channels and the fasteners. Customers need to cut a small part of the rubber seal to be presented at the store if the specifications are not known. Also, the exact measurement or length must be recorded before buying the replacement. Custom cut items cannot be replaced or returned so one has to be careful in recording the correct measurement. Thus, customers are advised to email or call the rubber seal manufacturer if they are not sure about the exact product.
One needs to examine physical of the bottom of the garage door to see if it is double channel or a bulb. If still unsure, buying the entire kit is recommended because it contains all the possible types of materials. Replacements materials for garage doors are generic and will usually fit many types of doors. However, some customers would want to be 100% certain about their purchase. If that is desired, the bottom seal can be slightly pulled out of the tract to take the measurement. If this still does not work, customers can call the rubber seals company (or send an email) and ask for a sample piece of material. This transaction should be free of charge, but it may be different conditions in each company.
With complete and appropriate set of materials to use, it is easy to install the replacement rubber. Raise the garage door at a comfortable height. Remove the old rubber seal by sliding it through the channel. Use a screwdriver to pull out existing screws. Gently slide the new rubber seal through the channel. With that, the garage door should comfortably be closed without a hitch. Check the garage door for smoothness in closing and opening. This way, unnecessary inconvenience and accidents, may be prevented. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
|
